Elikliv Microscope, LCD Digital Coin Microscope 1000x, Coin Magnifier with 8 Adjustable LED Lights, PC View Compatible with Windows/MacBook, EDM4, 4.3 Inch

So far, so good.
My scope just arrived late yesterday, so other than assembling it and turning it on for a few minutes to see if it worked, I haven’t had time to truly evaluate it. What I can say is it’s really quite amazing that technology has reached a point that a product like this could be delivered for the price I paid. Is what I see on the screen good enough for it to be useful to me? For now I’ll say yes, as I plan to use it on my workbench to do watch repair, so I don’t need something that can handle fast moving video scenes. The scope has the ability to show magnified views in three different resolutions: VGA (640), 720p and 1080p. Obviously, the screen isn’t very large, but it’s sufficient for my use, and the quality of the video picture is reasonably good, especially for the price! The view on screen doesn’t lack for enough light, as the scope has a ring of LEDs around the lens and they’re bright. There’s no shadows in the picture from misaligned lighting elements, and despite just about everything on the scope being made of plastic everything works as it’s supposed to. The entire setup is very light-weight, but it’s relatively stable in use. The base on mine had a minute amount of “side-to-side” rock to it, which I “took out” by setting the base at the edge of my bench and pressed down a bit on one of the corners, flexing the two pieces of plastic used to make the base. I believe this worked because the two plastic base pieces are most likely “snapped” together, not unlike how so many laptop PC cases snap together. The difference on this scope is there doesn’t seem to be any screws in the base at all, while laptops have a large number of screws. So how did flexing the base allow the scope to sit flat? Using a snap-together case with no screws to lock things in place, the two pieces of plastic can move a very small amount against each other when you put some stress on them, like what happened when I allowed one corner of the scope’s base to hang-off of my bench and then pushed down on it. The base probably went into the shipping box with a flat base, but by the time it arrived it must have gotten bumped and the base may have slipped a little, leaving the slight rock to it. Regardless, the base is now flat, the scope is stable and unless something changes with it, I expect to get a lot of use out of it on my workbench. Does it have the best magnified picture? I’m sure it doesn’t, but honestly, for the price these scopes are going for, I don’t think you can beat it. You can pay a lot more on some other scopes and you probably won’t get any better than what this little one does. If you want an inexpensive way to look at small things in a much bigger manner, give this Elikliv scope a try!

short focal length can be improved. a good low price scope
I’ve used a few of these types of “microscopes” really magnification systems, for electronics etc. This one was very inexpensive and has some nice features. The only fly in the ointment, or issue, is the short focal length,caused by the metal rod that holds the magnifier/screen mechanismThe rod is too short to back out far enough to see a coin in its entirety. This can be remedied by purchasing a 12mm or 1/2″ dowel rod, and cutting it to a more useful length. You will need to supplement light as the lights are in the optics and aren’t strong enough to illuminate a longer distance.I used a gooseneck led book light that was battery and/or USB powered, it clamps to the stand(dowel rod) and can be bent to shine on the proper area.The scope works fine, The case if you purchase it (I bought the combo) is a tight fit, the box it came in would probably work much better, it took many tries to get everything to fit properly in the case. A larger case would be more useful as foam padding could then be inserted into the case. If you make the longer dowel rod, it won’t fit in the basic case. again a larger case would be better to accomadate the new rod and additional lighting etc….

Works great
Works really well. You have to adjust it via the… I’m sorry I don’t know what its called… the twisty thing above the lenses to focus it just like on a camera. It stays charged for a long time, but I don’t use it super often either. I didn’t even know it could hold a charge and didn’t have to stay plugged in all the time so I’ll say that’s a bonus. The quality isn’t the best, sort of like watching 90’s TV, but it works and shows what it needs to show. I now know that some coins have words and numbers on the sides so that was fun to learn. My daughter loves looking through this, aswell. Doesn’t just work on coins, it’ll zoom in dark near everything as long as it isn’t microscopic. It doesn’t view things that small.

Buon rapporto qualità prezzo, messa a fuoco con rotella non viene citata nelle istruzioni, che potrebbero migliorare

Microscopio muy bueno, detalles expectaculares y calidad y precio perfecto.Saludos

I recently purchased the Elikliv LCD Digital Coin Microscope (EDM4), and it has exceeded my expectations in many ways. As a coin collector, I needed a reliable tool to inspect the finer details of my collection, and this microscope delivered.Design and Build QualityThe 4.3-inch LCD screen is bright and clear, making it easy to see the details of coins without straining my eyes. The build feels sturdy for its price point, and the adjustable stand is a great feature for getting the right angle and focus.PerformanceThe magnification goes up to 1000x, which is more than enough for my needs. I was able to inspect mint marks, imperfections, and other intricate details on coins effortlessly. The image quality is sharp, especially when the 8 adjustable LED lights are properly positioned. These lights are a game-changer for ensuring consistent illumination, even in low-light conditions.Ease of UseSetting up the microscope was straightforward. It’s plug-and-play for both my Windows laptop and my MacBook, which was a pleasant surprise. I could easily switch between viewing on the LCD screen and using the PC view to save images or share details with fellow collectors.VersatilityWhile I bought it primarily for coin inspection, I’ve found it useful for other hobbies like examining stamps and small electronic components. The adjustable magnification and ability to save images on my computer make it versatile for various tasks.A Few Minor DownsidesThe only thing I wish was improved is the height adjustment mechanism, which can be a bit stiff at times. Also, while the screen size is sufficient, a slightly larger display would have been a nice touch.ConclusionOverall, the Elikliv EDM4 is an excellent tool for hobbyists and professionals alike. It combines affordability, functionality, and ease of use into one compact package. If you’re a coin collector or someone who works with small objects regularly, I highly recommend this microscope. It’s a solid investment for the price!